Care and Maintenance of Marble

Marble is stone that is generally polished and used in fine building work.Marble is NOT recommended for Kitchen countertops but is okay for bathroom vanities, tub surrounds and fireplaces. It may be white or colored. It is porous, and can be stained and can be etched by acids. Wipe off anything spilled on marble immediately, as you would on a wood surface. Avoid setting beverage glasses directly on marble as they leave rings.

Seal the marble with paste or sealer to help prevent stains and soil from being absorbed into the porous surface. Do not let acids contact the marble as they will etch it. Strong alkaline solutions are absorbed by the marble and break down the surface leaving it rough. If well-sealed, damp-mopping should keep it clean. If soil does not all come off, wash with a solution of mild detergent (such as Liquid Dishwashing Detergents) and water, and rinse thoroughly. Remove stains promptly. Check with Shaker Hill Granite for special cleaners if needed to remove stains.

Removing Stains from Marble

Make a poultice from white absorbent material such as a napkin, blotter, paper towel or facial tissue, dampened with the chemical recommended below to dissolve that stain; or mix whiting with that chemical to make a soft paste to cover the stain. The poultice should be left on the stain from 1 hour up to 48 hours, depending on the age and depth of the stain. Plastic wrap, held in place by masking tape, can be put over the poultice to keep it damp; otherwise it will have to be re-dampened with the chemical periodically. Mix only enough poultice for immediate use; mix a second batch later if another application is needed.

Organic Stains: Tea, coffee, colors bleached from paper, textiles or soft drinks. Make poultice soaked with 20% peroxide (hair bleaching strength) and a few drop of ammonia.

Oil Stains: Oil stains may include butter, hand cream or lotion. As soon as possible, spread surface with an absorbent fine powder such as whiting or even corn starch. After a short time brush to remove and reapply more powder. Let stand 24 hours. To remove: Scrub with hot, sudsy (detergent) solution and stiff brush. Or wipe with ammonia-dampened cloth. In either case, then rinse and wipe dry. If these alkaline solutions don't remove all the oil, you can try a solvent. Make a poultice dampened with acetone or amyl acetate (available at drug stores), or with home dry cleaning fluid. Use good ventilation with windows open to remove fumes, do not use near spark or flame, and do not leave on too long.

Rust Stains: Usually the result of metal items such as a lamp, metal container in which plant is placed etc. Use a commercial rust stain remover. Follow directions exactly and do not leave on surface very long as acid in many rust removers can etch the surface.

Acids Fruit juice, carbonated beverages or other acids will etch (remove shiny surface) if allowed to remain on marble. Wipe up acid spill immediately, and wipe surface with wet cloth. If surfaced is etched, polishing may be required.